Agilent Indonesia

Oscilloscope 
DSAX92504A Infiniium High-Performance Oscilloscope: 25 GHz

     

Description

---

When you’re deploying emerging high speed serial bus technology, identifying spectral content of wide-bandwidth RF signals, or analyzing transient physical phenomena, you need the truest representation of your signals under test. The Agilent Infiniium 90000 X-Seriesoscilloscopes are engineered for 33 GHz true analog bandwidth that delivers. By investing in a proprietary integrated circuit process, Agilent has enabled high-frequency capability while yielding the industry’s lowest noise floor and jitter measurement floor; giving the 90000 X-Series true analog hardware performance to 33 GHz. Other vendors, limited to 16 GHz hardware technology blocks, employ various techniques such as digital signal processing boosting and frequency domain interleave to increase the bandwidth specification of their scopes. However, these methods increase noise density and distortions with detrimental impact on measurement accuracy. The 90000 X-Series deliver the lowest noise and have the lowest jitter measurement floor in the industry, ensuring superior measurement accuracy.

Key Features & Specifications

---

The world’s fastest real-time oscilloscope

• 25 GHz true analog bandwidth, upgradeable to industry’s best: 33 GHz
• 80 GSa/s sample rate 2 channels / 40 GSa/s sample rate 4 channels
• Industry deepest memory with up to 2 Gpts memory (50 Mpts per channel standard)
• See the 90000 X-Series in action

The highest real-time scope measurement accuracy

• Industry’s highest true analog bandwidth (twice the analog bandwidth of leading competitor)
• Industry’s lowest oscilloscope noise floor (2.30 mVrms at 33 GHz at 50mV/div)
• Lowest jitter measurement floor (<150 fS)

Industry’s first and only 30 GHz oscilloscope probing system

• Fully customized probe amplifier s-parameter characteristics provides accurate probe correction for each individual probe amplifier
• Industry’s first bandwidth-upgradeable probes mean you will be prepared for your evolving probing needs
• PrecisionProbe allows you to quickly characterize any input to your oscilloscope.

Signal Analyzer N9343C Handheld Spectrum Analyzer (HSA), 1 MHz to 13.6 GHz

     

Description

---

If you are making measurements in the field, the Agilent N9343C handheld spectrum analyzer (HSA) makes your job easier. MIL PRF 28800 Class 2 compliant, it has the features you need for operating in tough field environments, and its measurement performance gives you confidence the job’s been done right. The N9343C HSA lets you automate routine tasks to save time and ensure consistent results. Field testing just got easier with the Agilent N9343C HSA.

Key Features & Specifications

---

Functionality

• 1 MHz to 13.6 GHz (tunable to 9 kHz)
• Internal preamplifier up to 13.6 GHz
• Built-in GPS receiver and GPS antenna
• Built-in tracking generator

Performance

• -144 dBm typical displayed average noise level (DANL)
• ±1.3 dB amplitude accuracy
• +15 dBm typical third order intercept (TOI)
• < 0.7 s sweep time for 13.6 GHz full span

Digital Multi Meter 34411A Digital Multimeter

      

Description

---

Key Features & Specifications

---

All the features of the 34410A, plus:

• 50,000 readings/sec. @ 4 1/2 digits to the PC
• 1M reading memory
• Analog level and pre/post triggering

Digitizers U2542A 500kSa/s USB Modular Simultaneous Data Acquisition  

    

Description

---

The U2542A offers multifunction capabilities in a module. It can be used like a digital multimeter in polling mode. It can be transformed to be a simple scope using the continuous mode with simple triggering capabilities. No matter if it is used as a standalone module or when plugged into a U2781A USB modular instrument chassis, the synchronization and triggering capabilities allow great flexibility in making the desired measurements. With the analog output being able to send out predefined or arbitrary waveforms make this a good tool when closed loop feedback or stimulus is required.

Key Features & Specifications

---

Dynamic Signal Analyzers,Mechanical & Physical Test 
35670A 2 or 4 channel FFT Dynamic Signal Analyzer

     
  

Description

---

Key Features & Specifications

---

• 102.4 kHz at 1 channel, 51.2 kHz at 2 channel, 25.6 kHz at 4 channel
• 100, 200, 400, 800 and 1600 lines of resolution
• 90 dB dynamic range, 130 dB in swept-sine mode
• 15 Measurements and 7 different source signals

EMIEMC,Phase Noise,Physical Layer
N9038A MXE EMI Receiver  

   

Description

---

Key Features & Specifications

---

Functionality

• Frequency 20 Hz to 8.4 GHz and 26.5 GHz
• CISPR, MIL-STD 6 dB, and standard 3 dB resolution bandwidths
• Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
• Extensive diagnostic

Performance

• Meets CISPR 16-1-1 2010 EMI receiver requirements
• ±0.75 dB absolute amplitude accuracy
• -167 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
• Phase noise -106 dBc/Hz 10 kHz offset

Distributed By : PT.Tridinamika Jaya Instrument,Agen Resmi Agilent Indonesia
tag : Agilent N9038A Oscilloscope distributor agilent agilent power meter power sensor oscilloscope osiloskop osciloscop oscilloscopes osciloscopes clamp meter digital clamp meter digital multi meter multimeter digital oscilloscopes multimeters digitalcapacitance meter agilent indonesia agilent price agilent spectrum analyzer

Frequency Counter Products 
53131A 225 MHz Universal Frequency Counter/Timer 

 

Description

---

The Agilent 53131A universal counter is a 2-channel counter. It has the capability to do the job quickly and correctly from fast signal processing to automated limit tests.

Key Features & Specifications

---